57 lines
1.8 KiB
C
57 lines
1.8 KiB
C
// spi.c
|
|
//
|
|
// Example program for bcm2835 library
|
|
// Shows how to interface with SPI to transfer a byte to and from an SPI device
|
|
//
|
|
// After installing bcm2835, you can build this
|
|
// with something like:
|
|
// gcc -o spi spi.c -l bcm2835
|
|
// sudo ./spi
|
|
//
|
|
// Or you can test it before installing with:
|
|
// gcc -o spi -I ../../src ../../src/bcm2835.c spi.c
|
|
// sudo ./spi
|
|
//
|
|
// Author: Mike McCauley
|
|
// Copyright (C) 2012 Mike McCauley
|
|
// $Id: RF22.h,v 1.21 2012/05/30 01:51:25 mikem Exp $
|
|
|
|
#include <bcm2835.h>
|
|
#include <stdio.h>
|
|
|
|
int main(int argc, char **argv)
|
|
{
|
|
// If you call this, it will not actually access the GPIO
|
|
// Use for testing
|
|
// bcm2835_set_debug(1);
|
|
|
|
if (!bcm2835_init())
|
|
{
|
|
printf("bcm2835_init failed. Are you running as root??\n");
|
|
return 1;
|
|
}
|
|
|
|
if (!bcm2835_spi_begin())
|
|
{
|
|
printf("bcm2835_spi_begin failed. Are you running as root??\n");
|
|
return 1;
|
|
}
|
|
bcm2835_spi_setBitOrder(BCM2835_SPI_BIT_ORDER_MSBFIRST); // The default
|
|
bcm2835_spi_setDataMode(BCM2835_SPI_MODE0); // The default
|
|
bcm2835_spi_setClockDivider(BCM2835_SPI_CLOCK_DIVIDER_65536); // The default
|
|
bcm2835_spi_chipSelect(BCM2835_SPI_CS0); // The default
|
|
bcm2835_spi_setChipSelectPolarity(BCM2835_SPI_CS0, LOW); // the default
|
|
|
|
// Send a byte to the slave and simultaneously read a byte back from the slave
|
|
// If you tie MISO to MOSI, you should read back what was sent
|
|
uint8_t send_data = 0x23;
|
|
uint8_t read_data = bcm2835_spi_transfer(send_data);
|
|
printf("Sent to SPI: 0x%02X. Read back from SPI: 0x%02X.\n", send_data, read_data);
|
|
if (send_data != read_data)
|
|
printf("Do you have the loopback from MOSI to MISO connected?\n");
|
|
bcm2835_spi_end();
|
|
bcm2835_close();
|
|
return 0;
|
|
}
|
|
|