e-paper-display/bcm2835-1.71/e-Paper/Arduino/epd2in13/epd2in13.cpp

284 lines
8.5 KiB
C++

/**
* @filename : epd2in13.cpp
* @brief : Implements for e-paper library
* @author : Yehui from Waveshare
*
* Copyright (C) Waveshare September 9 2017
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdlib.h>
#include "epd2in13.h"
Epd::~Epd() {
};
Epd::Epd() {
reset_pin = RST_PIN;
dc_pin = DC_PIN;
cs_pin = CS_PIN;
busy_pin = BUSY_PIN;
width = EPD_WIDTH;
height = EPD_HEIGHT;
};
int Epd::Init(const unsigned char* lut) {
/* this calls the peripheral hardware interface, see epdif */
if (IfInit() != 0) {
return -1;
}
/* EPD hardware init start */
this->lut = lut;
Reset();
SendCommand(DRIVER_OUTPUT_CONTROL);
SendData((EPD_HEIGHT - 1) & 0xFF);
SendData(((EPD_HEIGHT - 1) >> 8) & 0xFF);
SendData(0x00); // GD = 0; SM = 0; TB = 0;
SendCommand(BOOSTER_SOFT_START_CONTROL);
SendData(0xD7);
SendData(0xD6);
SendData(0x9D);
SendCommand(WRITE_VCOM_REGISTER);
SendData(0xA8); // VCOM 7C
SendCommand(SET_DUMMY_LINE_PERIOD);
SendData(0x1A); // 4 dummy lines per gate
SendCommand(SET_GATE_TIME);
SendData(0x08); // 2us per line
SendCommand(DATA_ENTRY_MODE_SETTING);
SendData(0x03); // X increment; Y increment
SetLut(this->lut);
/* EPD hardware init end */
return 0;
}
/**
* @brief: basic function for sending commands
*/
void Epd::SendCommand(unsigned char command) {
DigitalWrite(dc_pin, LOW);
SpiTransfer(command);
}
/**
* @brief: basic function for sending data
*/
void Epd::SendData(unsigned char data) {
DigitalWrite(dc_pin, HIGH);
SpiTransfer(data);
}
/**
* @brief: Wait until the busy_pin goes LOW
*/
void Epd::WaitUntilIdle(void) {
while(DigitalRead(busy_pin) == HIGH) { //LOW: idle, HIGH: busy
DelayMs(100);
}
}
/**
* @brief: module reset.
* often used to awaken the module in deep sleep,
* see Epd::Sleep();
*/
void Epd::Reset(void) {
DigitalWrite(reset_pin, LOW); //module reset
DelayMs(200);
DigitalWrite(reset_pin, HIGH);
DelayMs(200);
}
/**
* @brief: set the look-up table register
*/
void Epd::SetLut(const unsigned char* lut) {
this->lut = lut;
SendCommand(WRITE_LUT_REGISTER);
/* the length of look-up table is 30 bytes */
for (int i = 0; i < 30; i++) {
SendData(this->lut[i]);
}
}
/**
* @brief: put an image buffer to the frame memory.
* this won't update the display.
*/
void Epd::SetFrameMemory(
const unsigned char* image_buffer,
int x,
int y,
int image_width,
int image_height
) {
int x_end;
int y_end;
if (
image_buffer == NULL ||
x < 0 || image_width < 0 ||
y < 0 || image_height < 0
) {
return;
}
/* x point must be the multiple of 8 or the last 3 bits will be ignored */
x &= 0xF8;
image_width &= 0xF8;
if (x + image_width >= this->width) {
x_end = this->width - 1;
} else {
x_end = x + image_width - 1;
}
if (y + image_height >= this->height) {
y_end = this->height - 1;
} else {
y_end = y + image_height - 1;
}
SetMemoryArea(x, y, x_end, y_end);
/* set the frame memory line by line */
for (int j = y; j <= y_end; j++) {
SetMemoryPointer(x, j);
SendCommand(WRITE_RAM);
for (int i = x / 8; i <= x_end / 8; i++) {
SendData(image_buffer[(i - x / 8) + (j - y) * (image_width / 8)]);
}
}
}
/**
* @brief: put an image buffer to the frame memory.
* this won't update the display.
*
* Question: When do you use this function instead of
* void SetFrameMemory(
* const unsigned char* image_buffer,
* int x,
* int y,
* int image_width,
* int image_height
* );
* Answer: SetFrameMemory with parameters only reads image data
* from the RAM but not from the flash in AVR chips (for AVR chips,
* you have to use the function pgm_read_byte to read buffers
* from the flash).
*/
void Epd::SetFrameMemory(const unsigned char* image_buffer) {
SetMemoryArea(0, 0, this->width - 1, this->height - 1);
/* set the frame memory line by line */
for (int j = 0; j < this->height; j++) {
SetMemoryPointer(0, j);
SendCommand(WRITE_RAM);
for (int i = 0; i < this->width / 8; i++) {
SendData(pgm_read_byte(&image_buffer[i + j * (this->width / 8)]));
}
}
}
/**
* @brief: clear the frame memory with the specified color.
* this won't update the display.
*/
void Epd::ClearFrameMemory(unsigned char color) {
SetMemoryArea(0, 0, this->width - 1, this->height - 1);
/* set the frame memory line by line */
for (int j = 0; j < this->height; j++) {
SetMemoryPointer(0, j);
SendCommand(WRITE_RAM);
for (int i = 0; i < this->width / 8; i++) {
SendData(color);
}
}
}
/**
* @brief: update the display
* there are 2 memory areas embedded in the e-paper display
* but once this function is called,
* the the next action of SetFrameMemory or ClearFrame will
* set the other memory area.
*/
void Epd::DisplayFrame(void) {
SendCommand(DISPLAY_UPDATE_CONTROL_2);
SendData(0xC4);
SendCommand(MASTER_ACTIVATION);
SendCommand(TERMINATE_FRAME_READ_WRITE);
WaitUntilIdle();
}
/**
* @brief: private function to specify the memory area for data R/W
*/
void Epd::SetMemoryArea(int x_start, int y_start, int x_end, int y_end) {
SendCommand(SET_RAM_X_ADDRESS_START_END_POSITION);
/* x point must be the multiple of 8 or the last 3 bits will be ignored */
SendData((x_start >> 3) & 0xFF);
SendData((x_end >> 3) & 0xFF);
SendCommand(SET_RAM_Y_ADDRESS_START_END_POSITION);
SendData(y_start & 0xFF);
SendData((y_start >> 8) & 0xFF);
SendData(y_end & 0xFF);
SendData((y_end >> 8) & 0xFF);
}
/**
* @brief: private function to specify the start point for data R/W
*/
void Epd::SetMemoryPointer(int x, int y) {
SendCommand(SET_RAM_X_ADDRESS_COUNTER);
/* x point must be the multiple of 8 or the last 3 bits will be ignored */
SendData((x >> 3) & 0xFF);
SendCommand(SET_RAM_Y_ADDRESS_COUNTER);
SendData(y & 0xFF);
SendData((y >> 8) & 0xFF);
WaitUntilIdle();
}
/**
* @brief: After this command is transmitted, the chip would enter the
* deep-sleep mode to save power.
* The deep sleep mode would return to standby by hardware reset.
* You can use Epd::Init() to awaken
*/
void Epd::Sleep() {
SendCommand(DEEP_SLEEP_MODE);
WaitUntilIdle();
}
const unsigned char lut_full_update[] =
{
0x22, 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA, 0x11,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00
};
const unsigned char lut_partial_update[] =
{
0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x0F, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* END OF FILE */