e-paper-display/bcm2835-1.71/e-Paper/Arduino/epd1in02d/epd1in02d.ino

45 lines
1.0 KiB
C++

#include "GUI_Paint.h"
#include "DEV_Config.h"
#include "EPD_1in02d.h"
#include "fonts.h"
#include "imagedata.h"
unsigned char image_temp[1280]={0};
Paint paith(image_temp, 80, 128);
void setup() {
Config_Init();
if(EPD_Init() != 0) {
Serial.print("e-Paper init failed\r\n");
}
Serial.print("1.02inch e-Paper Module1\r\n");
EPD_Clear();
DEV_Delay_ms(500);
Serial.print("Drawing:BlackImage\r\n");
paith.DrawStringAt(13, 0, "1.02inch", &Font12, 0xff);
paith.DrawStringAt(22, 13, "epd", &Font12, 0xff);
paith.DrawStringAt(10, 30, "ABC123", &Font16, 0xff);
paith.DrawLine(10, 50, 60, 100, 0xff );
paith.DrawLine(10, 100, 60, 50, 0xff);
paith.DrawRectangle(10, 50, 60, 100, 0xff);
paith.DrawFilledCircle(35, 75, 20, 0xff);
Serial.print("EPD_Display\r\n");
EPD_Display(image_temp);
DEV_Delay_ms(2000);
EPD_Display_Image(IMAGE_DATA);
DEV_Delay_ms(500);
EPD_Clear();
EPD_Sleep();
Serial.print("Goto Sleep mode...\r\n");
DEV_Delay_ms(2000);
}
void loop() {
}