e-paper-display/bcm2835-1.71/examples/event/event.c

58 lines
1.2 KiB
C

// event.c
//
// Example program for bcm2835 library
// Event detection of an input pin
//
// After installing bcm2835, you can build this
// with something like:
// gcc -o event event.c -l bcm2835
// sudo ./event
//
// Or you can test it before installing with:
// gcc -o event -I ../../src ../../src/bcm2835.c event.c
// sudo ./event
//
// Author: Mike McCauley
// Copyright (C) 2011 Mike McCauley
// $Id: RF22.h,v 1.21 2012/05/30 01:51:25 mikem Exp $
#include <bcm2835.h>
#include <stdio.h>
// Input on RPi pin GPIO 15
#define PIN RPI_GPIO_P1_15
int main(int argc, char **argv)
{
// If you call this, it will not actually access the GPIO
// Use for testing
// bcm2835_set_debug(1);
if (!bcm2835_init())
return 1;
// Set RPI pin P1-15 to be an input
bcm2835_gpio_fsel(PIN, BCM2835_GPIO_FSEL_INPT);
// with a pullup
bcm2835_gpio_set_pud(PIN, BCM2835_GPIO_PUD_UP);
// And a low detect enable
bcm2835_gpio_len(PIN);
while (1)
{
if (bcm2835_gpio_eds(PIN))
{
// Now clear the eds flag by setting it to 1
bcm2835_gpio_set_eds(PIN);
printf("low event detect for pin 15\n");
}
// wait a bit
delay(500);
}
bcm2835_close();
return 0;
}