e-paper-display/bcm2835-1.71/e-Paper/RaspberryPi_JetsonNano/python/lib/waveshare_epd/epd7in5bc.py

205 lines
7.3 KiB
Python

# *****************************************************************************
# * | File : epd7in5bc.py
# * | Author : Waveshare team
# * | Function : Electronic paper driver
# * | Info :
# *----------------
# * | This version: V4.0
# * | Date : 2019-06-20
# # | Info : python demo
# -----------------------------------------------------------------------------
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
import logging
from . import epdconfig
# Display resolution
EPD_WIDTH = 640
EPD_HEIGHT = 384
logger = logging.getLogger(__name__)
class EPD:
def __init__(self):
self.reset_pin = epdconfig.RST_PIN
self.dc_pin = epdconfig.DC_PIN
self.busy_pin = epdconfig.BUSY_PIN
self.cs_pin = epdconfig.CS_PIN
self.width = EPD_WIDTH
self.height = EPD_HEIGHT
# Hardware reset
def reset(self):
epdconfig.digital_write(self.reset_pin, 1)
epdconfig.delay_ms(200)
epdconfig.digital_write(self.reset_pin, 0)
epdconfig.delay_ms(5)
epdconfig.digital_write(self.reset_pin, 1)
epdconfig.delay_ms(200)
def send_command(self, command):
epdconfig.digital_write(self.dc_pin, 0)
epdconfig.digital_write(self.cs_pin, 0)
epdconfig.spi_writebyte([command])
epdconfig.digital_write(self.cs_pin, 1)
def send_data(self, data):
epdconfig.digital_write(self.dc_pin, 1)
epdconfig.digital_write(self.cs_pin, 0)
epdconfig.spi_writebyte([data])
epdconfig.digital_write(self.cs_pin, 1)
def ReadBusy(self):
logger.debug("e-Paper busy")
while(epdconfig.digital_read(self.busy_pin) == 0): # 0: idle, 1: busy
epdconfig.delay_ms(100)
logger.debug("e-Paper busy release")
def init(self):
if (epdconfig.module_init() != 0):
return -1
self.reset()
self.send_command(0x01) # POWER_SETTING
self.send_data(0x37)
self.send_data(0x00)
self.send_command(0x00) # PANEL_SETTING
self.send_data(0xCF)
self.send_data(0x08)
self.send_command(0x30) # PLL_CONTROL
self.send_data(0x3A) # PLL: 0-15:0x3C, 15+:0x3A
self.send_command(0x82) # VCM_DC_SETTING
self.send_data(0x28) #all temperature range
self.send_command(0x06) # BOOSTER_SOFT_START
self.send_data(0xc7)
self.send_data(0xcc)
self.send_data(0x15)
self.send_command(0x50) # VCOM AND DATA INTERVAL SETTING
self.send_data(0x77)
self.send_command(0x60) # TCON_SETTING
self.send_data(0x22)
self.send_command(0x65) # FLASH CONTROL
self.send_data(0x00)
self.send_command(0x61) # TCON_RESOLUTION
self.send_data(self.width >> 8) # source 640
self.send_data(self.width & 0xff)
self.send_data(self.height >> 8) # gate 384
self.send_data(self.height & 0xff)
self.send_command(0xe5) # FLASH MODE
self.send_data(0x03)
return 0
def getbuffer(self, image):
# logger.debug("bufsiz = ",int(self.width/8) * self.height)
buf = [0xFF] * (int(self.width/8) * self.height)
image_monocolor = image.convert('1')
imwidth, imheight = image_monocolor.size
pixels = image_monocolor.load()
logger.debug('imwidth = %d imheight = %d ',imwidth, imheight)
if(imwidth == self.width and imheight == self.height):
logger.debug("Horizontal")
for y in range(imheight):
for x in range(imwidth):
# Set the bits for the column of pixels at the current position.
if pixels[x, y] == 0:
buf[int((x + y * self.width) / 8)] &= ~(0x80 >> (x % 8))
elif(imwidth == self.height and imheight == self.width):
logger.debug("Vertical")
for y in range(imheight):
for x in range(imwidth):
newx = y
newy = self.height - x - 1
if pixels[x, y] == 0:
buf[int((newx + newy*self.width) / 8)] &= ~(0x80 >> (y % 8))
return buf
def display(self, imageblack, imagered):
self.send_command(0x10)
for i in range(0, int(self.width / 8 * self.height)):
temp1 = imageblack[i]
temp2 = imagered[i]
j = 0
while (j < 8):
if ((temp2 & 0x80) == 0x00):
temp3 = 0x04 #red
elif ((temp1 & 0x80) == 0x00):
temp3 = 0x00 #black
else:
temp3 = 0x03 #white
temp3 = (temp3 << 4) & 0xFF
temp1 = (temp1 << 1) & 0xFF
temp2 = (temp2 << 1) & 0xFF
j += 1
if((temp2 & 0x80) == 0x00):
temp3 |= 0x04 #red
elif ((temp1 & 0x80) == 0x00):
temp3 |= 0x00 #black
else:
temp3 |= 0x03 #white
temp1 = (temp1 << 1) & 0xFF
temp2 = (temp2 << 1) & 0xFF
self.send_data(temp3)
j += 1
self.send_command(0x04) # POWER ON
self.ReadBusy()
self.send_command(0x12) # display refresh
epdconfig.delay_ms(100)
self.ReadBusy()
def Clear(self):
self.send_command(0x10)
for i in range(0, int(self.width / 8 * self.height)):
self.send_data(0x33)
self.send_data(0x33)
self.send_data(0x33)
self.send_data(0x33)
self.send_command(0x04) # POWER ON
self.ReadBusy()
self.send_command(0x12) # display refresh
epdconfig.delay_ms(100)
self.ReadBusy()
def sleep(self):
self.send_command(0x02) # POWER_OFF
self.ReadBusy()
self.send_command(0x07) # DEEP_SLEEP
self.send_data(0XA5)
epdconfig.delay_ms(2000)
epdconfig.module_exit()
### END OF FILE ###