e-paper-display/bcm2835-1.71/e-Paper/Arduino/epd2in13b_V3/epd2in13b_V3.ino

106 lines
3.2 KiB
C++

/**
* @filename : epd2in13b-demo.ino
* @brief : 2.13inch e-paper display (B) V3 demo
* @author : Yehui from Waveshare
*
* Copyright (C) Waveshare July 17 2017
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <SPI.h>
#include "epd2in13b_V3.h"
#include "imagedata.h"
#include "epdpaint.h"
#define COLORED 0
#define UNCOLORED 1
unsigned char image[2756/4];
//unsigned char image_r[2756];
void setup() {
// put your setup code here, to run once:
Serial.begin(9600);
Epd epd;
if (epd.Init() != 0) {
Serial.print("e-Paper init failed");
return;
}
/* This clears the SRAM of the e-paper display */
epd.ClearFrame();
/**
* Due to RAM not enough in Arduino UNO, a frame buffer is not allowed.
* In this case, a smaller image buffer is allocated and you have to
* update a partial display several times.
* 1 byte = 8 pixels, therefore you have to set 8*N pixels at a time.
*/
Paint paint(image, 104, 106); //width should be the multiple of 8
paint.Clear(UNCOLORED);
paint.DrawStringAt(8, 2, "e-Paper Demo", &Font12, COLORED);
epd.Display(image);//1
paint.Clear(UNCOLORED);
paint.DrawRectangle(2,2,50,50,COLORED);
paint.DrawLine(2,2,50,50,COLORED);
paint.DrawLine(2,50,50,2,COLORED);
epd.Display(image);//2
paint.Clear(UNCOLORED);
paint.DrawCircle(25,25,20,COLORED);
epd.Display(image);//3
paint.Clear(UNCOLORED);
epd.Display(image);//4
paint.Clear(UNCOLORED);
paint.DrawStringAt(8, 20, "Hello world", &Font12, COLORED);
epd.Display(image);//5
paint.Clear(UNCOLORED);
paint.DrawFilledRectangle(52,2,100,50,COLORED);
paint.DrawLine(52,2,100,50,UNCOLORED);
paint.DrawLine(100,2,52,50,UNCOLORED);
epd.Display(image);//6
paint.Clear(UNCOLORED);
paint.DrawFilledCircle(75,25,20,COLORED);
epd.Display(image);//7
paint.Clear(UNCOLORED);
epd.Display(image);//8
delay(1000);
/* This displays an image */
epd.DisplayFrame(IMAGE_BLACK, IMAGE_RED);
/* Deep sleep */
epd.Sleep();
}
void loop() {
// put your main code here, to run repeatedly:
}