/** * @filename : epd4in2_V2.h * @brief : Header file for Dual-color e-paper library epd4in2.cpp * @author : Yehui from Waveshare * * Copyright (C) Waveshare Nov 11 2020 * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documnetation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #ifndef EPD4IN2_V2_H #define EPD4IN2_V2_H #include "epdif.h" // Display resolution #define EPD_WIDTH 400 #define EPD_HEIGHT 300 // EPD4IN2 commands #define PANEL_SETTING 0x00 #define POWER_SETTING 0x01 #define POWER_OFF 0x02 #define POWER_OFF_SEQUENCE_SETTING 0x03 #define POWER_ON 0x04 #define POWER_ON_MEASURE 0x05 #define BOOSTER_SOFT_START 0x06 #define DEEP_SLEEP 0x07 #define DATA_START_TRANSMISSION_1 0x10 #define DATA_STOP 0x11 #define DISPLAY_REFRESH 0x12 #define DATA_START_TRANSMISSION_2 0x13 #define LUT_FOR_VCOM 0x20 #define LUT_WHITE_TO_WHITE 0x21 #define LUT_BLACK_TO_WHITE 0x22 #define LUT_WHITE_TO_BLACK 0x23 #define LUT_BLACK_TO_BLACK 0x24 #define PLL_CONTROL 0x30 #define TEMPERATURE_SENSOR_COMMAND 0x40 #define TEMPERATURE_SENSOR_SELECTION 0x41 #define TEMPERATURE_SENSOR_WRITE 0x42 #define TEMPERATURE_SENSOR_READ 0x43 #define VCOM_AND_DATA_INTERVAL_SETTING 0x50 #define LOW_POWER_DETECTION 0x51 #define TCON_SETTING 0x60 #define RESOLUTION_SETTING 0x61 #define GSST_SETTING 0x65 #define GET_STATUS 0x71 #define AUTO_MEASUREMENT_VCOM 0x80 #define READ_VCOM_VALUE 0x81 #define VCM_DC_SETTING 0x82 #define PARTIAL_WINDOW 0x90 #define PARTIAL_IN 0x91 #define PARTIAL_OUT 0x92 #define PROGRAM_MODE 0xA0 #define ACTIVE_PROGRAMMING 0xA1 #define READ_OTP 0xA2 #define POWER_SAVING 0xE3 class Epd : EpdIf { public: unsigned int width; unsigned int height; Epd(); ~Epd(); int Init(void); void SendCommand(unsigned char command); void SendData(unsigned char data); void WaitUntilIdle(void); void Reset(void); void SetPartialWindow(const unsigned char* buffer_black, const unsigned char* buffer_red, int x, int y, int w, int l); void SetPartialWindowBlack(const unsigned char* buffer_black, int x, int y, int w, int l); void SetPartialWindowRed(const unsigned char* buffer_red, int x, int y, int w, int l); void DisplayFrame(const unsigned char* frame_black, const unsigned char* frame_red); void DisplayFrame(void); void ClearFrame(void); void Sleep(void); private: unsigned int reset_pin; unsigned int dc_pin; unsigned int cs_pin; unsigned int busy_pin; }; #endif /* EPD4IN2_H */ /* END OF FILE */