/**
 *  @filename   :   epd2in13-demo.ino
 *  @brief      :   2.13inch e-paper display demo
 *  @author     :   Yehui from Waveshare
 *
 *  Copyright (C) Waveshare     September 9 2017
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documnetation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to  whom the Software is
 * furished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include <SPI.h>
#include "epd2in13d.h"
#include "imagedata.h"

/**
  * Due to RAM not enough in Arduino UNO, a frame buffer is not allowed.
  * In this case, a smaller image buffer is allocated and you have to
  * update a partial display several times.
  * 1 byte = 8 pixels, therefore you have to set 8*N pixels at a time.
  */
Epd epd;

void setup()
{
    // put your setup code here, to run once:
    Serial.begin(9600);
    Serial.print("e-paper Init\n");
    epd.Init();
    Serial.print("e-paper Clear\n");
    epd.Clear();   // bit set = white, bit reset = black

    /**
     *  there are 2 memory areas embedded in the e-paper display
     *  and once the display is refreshed, the memory area will be auto-toggled,
     *  i.e. the next action of SetFrameMemory will set the other memory area
     *  therefore you have to set the frame memory and refresh the display twice.
     */
    Serial.print("Displayimage\n");
    epd.Displayimage(gImage_IMAGE);

    delay(500);
    epd.Clear(); 
    epd.Sleep();
}

void loop()
{
}