e-paper-display/bcm2835-1.71/e-Paper/Arduino/epd1in64g/epd1in64g.cpp

268 lines
6.4 KiB
C++
Raw Normal View History

2024-01-31 22:04:09 +00:00
/**
* @filename : epd1in64g.cpp
* @brief : Implements for e-paper library
* @author : Waveshare
*
* Copyright (C) Waveshare 2022/7/22
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdlib.h>
#include "epd1in64g.h"
Epd::~Epd() {
};
Epd::Epd() {
reset_pin = RST_PIN;
dc_pin = DC_PIN;
cs_pin = CS_PIN;
busy_pin = BUSY_PIN;
WIDTH = EPD_WIDTH;
HEIGHT = EPD_HEIGHT;
};
int Epd::Init() {
/* this calls the peripheral hardware interface, see epdif */
if (IfInit() != 0) {
return -1;
}
Reset();
SendCommand(0x66);
SendData(0x49);
SendData(0x55);
SendData(0x13);
SendData(0x5D);
SendCommand(0x66);
SendData(0x49);
SendData(0x55);
SendCommand(0xB0);
SendData(0x03);//1 boost 20211113
SendCommand(0x00);
SendData(0x4F);
SendData(0x6B);
SendCommand(0x03);
SendData(0x00);
SendCommand(0xF0);
SendData(0xF6);
SendData(0x0D);
SendData(0x00);
SendData(0x00);
SendData(0x00);
//20220303
SendCommand(0x06);
SendData(0xCF);
SendData(0xDF);
SendData(0x0F);
SendCommand(0x41);
SendData(0x00);
SendCommand(0x50);
SendData(0x30);
SendCommand(0x60);
SendData(0x0C);
SendData(0x05);
SendCommand(0x61);
SendData(0xA8);
SendData(0x00);
SendData(0xA8);
SendCommand(0x84);
SendData(0x01);
return 0;
}
/**
* @brief: basic function for sending commands
*/
void Epd::SendCommand(unsigned char command) {
DigitalWrite(dc_pin, LOW);
SpiTransfer(command);
}
/**
* @brief: basic function for sending data
*/
void Epd::SendData(unsigned char data) {
DigitalWrite(dc_pin, HIGH);
SpiTransfer(data);
}
/**
* @brief: Wait until the busy_pin goes LOW
*/
void Epd::ReadBusyH(void) {
Serial.print("e-Paper busy H\r\n ");
while(DigitalRead(busy_pin) == LOW) { //LOW: busy, HIGH: idle
DelayMs(5);
}
Serial.print("e-Paper busy release H\r\n ");
}
void Epd::ReadBusyL(void) {
Serial.print("e-Paper busy L\r\n ");
while(DigitalRead(busy_pin) == HIGH) { //LOW: idle, HIGH: busy
DelayMs(5);
}
Serial.print("e-Paper busy release L\r\n ");
}
/**
* @brief: module reset.
* often used to awaken the module in deep sleep,
* see Epd::Sleep();
*/
void Epd::Reset(void) {
DigitalWrite(reset_pin, HIGH);
DelayMs(20);
DigitalWrite(reset_pin, LOW); //module reset
DelayMs(2);
DigitalWrite(reset_pin, HIGH);
DelayMs(20);
}
/******************************************************************************
function : Turn On Display
parameter:
******************************************************************************/
void Epd::TurnOnDisplay(void)
{
SendCommand(0x12); // DISPLAY_REFRESH
SendData(0x01);
ReadBusyH();
SendCommand(0x02); // POWER_OFF
SendData(0X00);
ReadBusyH();
}
/******************************************************************************
function : Clear screen
parameter:
******************************************************************************/
void Epd::Clear(UBYTE color)
{
UWORD Width, Height;
Width = (WIDTH % 4 == 0)? (WIDTH / 4 ): (WIDTH / 4 + 1);
Height = HEIGHT;
SendCommand(0x68);
SendData(0x01);
SendCommand(0x04);
ReadBusyH();
SendCommand(0x10);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
SendData((color << 6) | (color << 4) | (color << 2) | color);
}
}
SendCommand(0x68);
SendData(0x00);
TurnOnDisplay();
}
/******************************************************************************
function : Sends the image buffer in RAM to e-Paper and displays
parameter:
******************************************************************************/
void Epd::Display(UBYTE *Image)
{
UWORD Width, Height;
Width = (WIDTH % 4 == 0)? (WIDTH / 4 ): (WIDTH / 4 + 1);
Height = HEIGHT;
SendCommand(0x68);
SendData(0x01);
SendCommand(0x04);
ReadBusyH();
SendCommand(0x10);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
SendData(pgm_read_byte(&Image[i + j * Width]));
}
}
SendCommand(0x68);
SendData(0x00);
TurnOnDisplay();
}
void Epd::Display_part(UBYTE *Image, UWORD xstart, UWORD ystart, UWORD image_width, UWORD image_height)
{
UWORD Width, Height, i, j;
Width = (WIDTH % 4 == 0)? (WIDTH / 4 ): (WIDTH / 4 + 1);
Height = HEIGHT;
SendCommand(0x68);
SendData(0x01);
SendCommand(0x04);
ReadBusyH();
SendCommand(0x10);
for(i=0; i<Height; i++) {
for(j=0; j< Width; j++) {
if(i<image_height+ystart && i>=ystart && j<(image_width+xstart)/4 && j>=xstart/4) {
SendData(pgm_read_byte(&Image[(j-xstart/4) + (image_width/4*(i-ystart))]));
}
else {
SendData(0x55);
}
}
}
SendCommand(0x68);
SendData(0x00);
TurnOnDisplay();
}
/******************************************************************************
function : Enter sleep mode
parameter:
******************************************************************************/
void Epd::Sleep(void)
{
SendCommand(0x02); // POWER_OFF
SendData(0X00);
SendCommand(0x07); // DEEP_SLEEP
SendData(0XA5);
}
/* END OF FILE */